The Article Database

The cold season can be a pain for those of you working with rotary screw air compressor. As a matter of fact, this aspect is also mentioned in the manual of instructions. Winter and an inappropriate care of your compressor usually leads to irremediable problems. Even when they are solvable, you will have to pull out a large amount of money from your pockets. So how can you avoid that? Well, there are some myths out there that can also be used as tips. Your first thought is to place the rotary screw air compressor indoors, in a heated room that has no connection with the open air. This is a good idea, but the compressor has at least one part connected with the open air – the duct-work or an oil cooler. The duct-work should normally be insulated, so thinking that you will just feel it once in a while to figure out if it is cold or not will not help. It may be cold, your compressor may have problems, yet you may not feel that. If your rotary screw air compressor doesn't have one, maybe you should get a professional to attach one – a thermostatic valve, to help you out with the oil. Such a valve will “trigger” a signal for the oil cooler. This way, it will start or stop automatically, whenever the temperature gets to an inappropriate value. The condensation within the compressed air system is taken off by the drains which are placed in the system. These drains will send the water to discharge lines which can get clogged or frozen during low temperatures. This may result in condensation going back towards the air system instead of draining out which can enter compressor components should the compressor be shut off for the night, alas a misery. Ensure that a space heater is brought close (not too close to hasten up the drying) near the rotary screw compressor for four to five hours before you start using it during cold and freezing temperatures. Even if you don't use the air compressor during the winter, this doesn't mean you have to abandon it just like that. Before giving it a vacation, change the oil and the filter. Only then you can store it. Fresh oil will protect it, since even if you don't use it, used oil will become acidic. On the other hand, if your rotary screw air compressor will work during the winter, you might want to opt for synthetic oil. It slops easier than other types of oil, although it may still cause problems. As a short conclusion, there are ways to get a rotary screw air compressor ready for winter, but do pay attention to the manual of instructions too before proceeding with the changes.

About the Author:
With all these considerations you should definitely be making the right choice of rotary screw kompresör with inverter for you. But to know about more deals on different hava kompresörü systems such as the vidali hava kompresörü or even the hava kurutucu or to get best deal from many of the air compressor brands, feel most free to check this site. http://www.vortexcompressor.com